SciScan STATIM 900 autoclave
The hygienist’s autoclave
STATIM 900 benefits
6 minute unwrapped cycle enables sterilization between patients
Engineered portability reduces load on a central sterilization area
Reduces the investment in expensive instruments
Low maintenance required
Demonstrating STATIM’s same ultra-fast sterilization times, The STATIM 900 can be located directly in the procedure area – so instrument sets can be sterilized immediately before starting work.
Fully automatic, the STATIM 900 offers sterilization programs for solid, hollow or rubber and plastic instruments, all with a one-touch keypad. An advanced microprocessor controls all functions and maintains optimal sterilization conditions, from start to finish.
When the sterilization cycle is complete, the sealed drawer opens automatically, providing a fresh set of sterilized instruments ready for use.
Sterilization cycle description chart
Cycle Solids Handpieces Rubber/Plastic
Sterilization time 3.5 minutes 5 minutes 30 minutes
Sterilization temp. 132º C 132º C 121º C
Total cycle time 6 minutes 8 minutes 35 minutes
Accessories
Wire basket complete
01-103636S
Specifications
Unit size
L 384 mm x W 292 mm x H 282 mm
L 15.1" x W 11.5" x H 11.1"
Drawer internal dimensions
L 190 mm x W 90 mm x H 50 mm
L 7.5" x W 3.54" x H 2.1"
Reservoir capacity
3.0 litres (distilled water) Approximately 40 cycles
Weight without water
13 kg/29 lbs
Power consumption
110-120 V, 50/60Hz, 1300 W
STATIM 900 benefits
6 minute unwrapped cycle enables sterilization between patients
Engineered portability reduces load on a central sterilization area
Reduces the investment in expensive instruments
Low maintenance required
Demonstrating STATIM’s same ultra-fast sterilization times, The STATIM 900 can be located directly in the procedure area – so instrument sets can be sterilized immediately before starting work.
Fully automatic, the STATIM 900 offers sterilization programs for solid, hollow or rubber and plastic instruments, all with a one-touch keypad. An advanced microprocessor controls all functions and maintains optimal sterilization conditions, from start to finish.
When the sterilization cycle is complete, the sealed drawer opens automatically, providing a fresh set of sterilized instruments ready for use.
Sterilization cycle description chart
Cycle Solids Handpieces Rubber/Plastic
Sterilization time 3.5 minutes 5 minutes 30 minutes
Sterilization temp. 132º C 132º C 121º C
Total cycle time 6 minutes 8 minutes 35 minutes
Accessories
Wire basket complete
01-103636S
Specifications
Unit size
L 384 mm x W 292 mm x H 282 mm
L 15.1" x W 11.5" x H 11.1"
Drawer internal dimensions
L 190 mm x W 90 mm x H 50 mm
L 7.5" x W 3.54" x H 2.1"
Reservoir capacity
3.0 litres (distilled water) Approximately 40 cycles
Weight without water
13 kg/29 lbs
Power consumption
110-120 V, 50/60Hz, 1300 W
SciScan STATIM 2000 cassette autoclave
The world’s favorite handpiece autoclave
STATIM 2000 benefits
Ultra-fast 6 minute unwrapped cycle
14 minute wrapped cycle
Exceptional instrument turnover
10 minute Dri-TecC drying technology
Single use water
Aseptic transfer of instrument directly to the point-of-use
Reduced instrument investment
Like the STATIM 900, the STATIM 2000 boasts a 6-minute cycle, but has the added advantage of employing a fully removable chamber so you can aseptically transport a set of freshly sterilized instruments directly to the procedure area.
The STATIM 2000 is fully automatic. Simply select one of the three sterilization programs and with a single touch of the keypad, begin the cycle. An advanced microprocessor controls all functions and maintains optimal sterilization conditions, from start to finish.
SciCan's STATIM cassette sterilizers have a biological effectiveness that has been proven in tests for hollow and solid instruments at many internationally recognized institutes in Canada, the United States, and Europe.
Sterilization cycle description chart
Cycle Unwrapped Wrapped Rubber/Plastic
Sterilization time 3.5 minutes 10 minutes 15 minutes
Sterilization Temp. 135º C 135º C 121º C
Total Cycle time 6 minutes 14 minutes 20 minutes
Accessories
01-100008A Cassette complete (with rack 01-106653)
01-100028S Seal & lubricant kit
01-100207S Air compressor filter
01-102119S Microbiological air filter
01-100812S Waste bottle complete
01-100204S Exhaust tube
01-103945S Instrument rack for unwrapped instruments
01-106653 Instrument rack for wrapped instruments
88-100270D Plastic cover for cassette tray
SCI134 Test Strip indicators (box of 250)
01-101783S Water reservoir cap & filter
01-109300S Water reservoir filter
Specifications
Unit size
L 480 mm x W 415 mm x H 150 mm
L 19" x W 16.25" x H 6"
Cassette internal dimensions
L 280 mm x W 180 mm x H 35 mm
L 11" x W 7" x H 1.5"
Reservoir capacity
4.0 litres (distilled water) Approximately 40 cycles
Weight without water
21 kg/46 lbs
Power consumption
110-120 V, 60Hz, 1300 W
STATIM 2000 benefits
Ultra-fast 6 minute unwrapped cycle
14 minute wrapped cycle
Exceptional instrument turnover
10 minute Dri-TecC drying technology
Single use water
Aseptic transfer of instrument directly to the point-of-use
Reduced instrument investment
Like the STATIM 900, the STATIM 2000 boasts a 6-minute cycle, but has the added advantage of employing a fully removable chamber so you can aseptically transport a set of freshly sterilized instruments directly to the procedure area.
The STATIM 2000 is fully automatic. Simply select one of the three sterilization programs and with a single touch of the keypad, begin the cycle. An advanced microprocessor controls all functions and maintains optimal sterilization conditions, from start to finish.
SciCan's STATIM cassette sterilizers have a biological effectiveness that has been proven in tests for hollow and solid instruments at many internationally recognized institutes in Canada, the United States, and Europe.
Sterilization cycle description chart
Cycle Unwrapped Wrapped Rubber/Plastic
Sterilization time 3.5 minutes 10 minutes 15 minutes
Sterilization Temp. 135º C 135º C 121º C
Total Cycle time 6 minutes 14 minutes 20 minutes
Accessories
01-100008A Cassette complete (with rack 01-106653)
01-100028S Seal & lubricant kit
01-100207S Air compressor filter
01-102119S Microbiological air filter
01-100812S Waste bottle complete
01-100204S Exhaust tube
01-103945S Instrument rack for unwrapped instruments
01-106653 Instrument rack for wrapped instruments
88-100270D Plastic cover for cassette tray
SCI134 Test Strip indicators (box of 250)
01-101783S Water reservoir cap & filter
01-109300S Water reservoir filter
Specifications
Unit size
L 480 mm x W 415 mm x H 150 mm
L 19" x W 16.25" x H 6"
Cassette internal dimensions
L 280 mm x W 180 mm x H 35 mm
L 11" x W 7" x H 1.5"
Reservoir capacity
4.0 litres (distilled water) Approximately 40 cycles
Weight without water
21 kg/46 lbs
Power consumption
110-120 V, 60Hz, 1300 W
SciScan STATIM 5000 cassette autoclave
STATIM 5000 benefits
Ultra fast 9 minute unwrapped cycle
17.5 minute wrapped cycle
Exceptional instrument turnover
15 minute Dri-TecR drying technology
Single water use
Aseptic transfer of instruments
Reduced instrument investment
The perfect blend of speed and capacity, the STATIM 5000 features a cycle as fast as 9 minutes with a sterilization chamber approximately three times the size of the 2000 model. This larger capacity cassette provides rapid high volume throughput sterilization with cycles up to four times the speed of common conventional autoclaves. The STATIM’s one-touch keypad offers a choice of four fully automated sterilization programs.
Aseptic transport
Similar to the STATIM 2000, the STATIM 5000 also employs a removable cassette, allowing dental practitioners to transport sets of freshly sterilized instruments to the treatment rooms safely and aseptically.
Specifications
Unit size
L 555 mm x W 415 mm x H 190 mm
L 21.75" x W 16.25" x H 7.5"
Cassette internal dimensions
L 380 mm x W 180 mm x H 75 mm
L 15" x W 7" x H 3"
Reservoir capacity
4.0 litres (distilled water)
Weight without water
33 kg / 72 lbs
Power consumption
110-120 V, 50/60 Hz, 1300 W
Optional internal printer Type: Thermal printer
Print 20 characters/ line
Speed 1 line/ sec.
Capacity 80 cycles/ roll
Ultra fast 9 minute unwrapped cycle
17.5 minute wrapped cycle
Exceptional instrument turnover
15 minute Dri-TecR drying technology
Single water use
Aseptic transfer of instruments
Reduced instrument investment
The perfect blend of speed and capacity, the STATIM 5000 features a cycle as fast as 9 minutes with a sterilization chamber approximately three times the size of the 2000 model. This larger capacity cassette provides rapid high volume throughput sterilization with cycles up to four times the speed of common conventional autoclaves. The STATIM’s one-touch keypad offers a choice of four fully automated sterilization programs.
Aseptic transport
Similar to the STATIM 2000, the STATIM 5000 also employs a removable cassette, allowing dental practitioners to transport sets of freshly sterilized instruments to the treatment rooms safely and aseptically.
Specifications
Unit size
L 555 mm x W 415 mm x H 190 mm
L 21.75" x W 16.25" x H 7.5"
Cassette internal dimensions
L 380 mm x W 180 mm x H 75 mm
L 15" x W 7" x H 3"
Reservoir capacity
4.0 litres (distilled water)
Weight without water
33 kg / 72 lbs
Power consumption
110-120 V, 50/60 Hz, 1300 W
Optional internal printer Type: Thermal printer
Print 20 characters/ line
Speed 1 line/ sec.
Capacity 80 cycles/ roll
SciScan STATIM 7000 cassette autoclave
STATIM 7000 benefits
12 minute unwrapped cycle
15 minute wrapped cycle
12 minute Dri-TecS drying technology
Internal water filtration system allows for tap water
Sterilizes up to 10 pouched packages
Holds two 8”x11” instrument management cassettes
RFID seal technology
Easy serviceability
Removable water reservoir
Built for the highest turnaround efficiency, the STATIM 7000 is the ultimate in speed and capacity. It exceeds the overall throughput of most conventional autoclaves, making it the perfect choice for any busy practice.
Cutting edge technology
Employing SciCan’s proprietary filtration system, the STATIM 7000 reservoir can be filled directly from the tap, eliminating the need to buy distilled water.
The STATIM 7000 cassette is equipped with a Radio Frequency Identification Device (RFID) tag to log the cycle data and alert you in advance whenever the seals needs replacing
Dri-TecS - Steam heat drying technology
Using the most advanced technology available in the industry today, the STATIM 7000 produces super heated steam to dry instruments. The thermal energy (heat) is extracted from steam and transferred directly to instruments, quickly evaporating any residual moisture.
Sterilization cycle description chart
Cycle Unwrapped Wrapped Rubber/Plastic
Sterilization time 3.5 minutes 3.5 minutes 30 minutes
Sterilization temp. 134º C 134º C 121º C
Total cycle time 12 minutes 15 minutes 37 minutes
12 minute unwrapped cycle
15 minute wrapped cycle
12 minute Dri-TecS drying technology
Internal water filtration system allows for tap water
Sterilizes up to 10 pouched packages
Holds two 8”x11” instrument management cassettes
RFID seal technology
Easy serviceability
Removable water reservoir
Built for the highest turnaround efficiency, the STATIM 7000 is the ultimate in speed and capacity. It exceeds the overall throughput of most conventional autoclaves, making it the perfect choice for any busy practice.
Cutting edge technology
Employing SciCan’s proprietary filtration system, the STATIM 7000 reservoir can be filled directly from the tap, eliminating the need to buy distilled water.
The STATIM 7000 cassette is equipped with a Radio Frequency Identification Device (RFID) tag to log the cycle data and alert you in advance whenever the seals needs replacing
Dri-TecS - Steam heat drying technology
Using the most advanced technology available in the industry today, the STATIM 7000 produces super heated steam to dry instruments. The thermal energy (heat) is extracted from steam and transferred directly to instruments, quickly evaporating any residual moisture.
Sterilization cycle description chart
Cycle Unwrapped Wrapped Rubber/Plastic
Sterilization time 3.5 minutes 3.5 minutes 30 minutes
Sterilization temp. 134º C 134º C 121º C
Total cycle time 12 minutes 15 minutes 37 minutes
SciScan BRAVO chamber autoclave
Features
Fractionated vacuum system
17L or 21L chamber capacity
Intelligent closed door drying
Integrated datalogger
Industry leading cycle times
Single use Pull’n Push water system
2 Year warranty
The BRAVO fractionated vacuum chamber autoclave continues the SciCan tradition of being at the forefront of innovation and technology. BRAVO incorporates both pre-vac (to remove air) and post-vac (to help drying) cycles to ensure perfect steam penetration for any load. BRAVO is true to the STATIM reputation for speed, providing rapid cycles for all types of instrument loads.
Specifications
Model
Size L x W x H*** Volume Dimension Weight Voltage
BRAVO 17/17V 22.0 x 19.0 x 16.5”
560 x 480 x 420mm 4.5 gal / 17L D10 x L13.5”
D254 x L343mm 128lbs / 55kg 120V, 20A or
220V, 10A
BRAVO 21V 25.0 x 19.0 x 16.5”
635 x 480 x 420mm 5.5 gal / 21L D10 x L17.5”
D254 x L445mm 139lbs / 63kg 120V, 20A or
220V, 10A
Fractionated vacuum system
17L or 21L chamber capacity
Intelligent closed door drying
Integrated datalogger
Industry leading cycle times
Single use Pull’n Push water system
2 Year warranty
The BRAVO fractionated vacuum chamber autoclave continues the SciCan tradition of being at the forefront of innovation and technology. BRAVO incorporates both pre-vac (to remove air) and post-vac (to help drying) cycles to ensure perfect steam penetration for any load. BRAVO is true to the STATIM reputation for speed, providing rapid cycles for all types of instrument loads.
Specifications
Model
Size L x W x H*** Volume Dimension Weight Voltage
BRAVO 17/17V 22.0 x 19.0 x 16.5”
560 x 480 x 420mm 4.5 gal / 17L D10 x L13.5”
D254 x L343mm 128lbs / 55kg 120V, 20A or
220V, 10A
BRAVO 21V 25.0 x 19.0 x 16.5”
635 x 480 x 420mm 5.5 gal / 21L D10 x L17.5”
D254 x L445mm 139lbs / 63kg 120V, 20A or
220V, 10A
SciScan STATIM 5000 G4 Sterilizer
STATIM 5000 G4 Sterilizer has a large 3.5” high-resolution touchscreen that offers a vivid display of messages and current cycle information. The bubble level has been integrated into the high-resolution touchscreen. STATIM G4 series now saves all the data from each cycle. This data can be copied onto the included USB drive, viewed on screen, or remotely stored in the Cloud via email.
Pre-Programmed CyclesUnwrapped
Wrapped
Rubber/Plastic
Heavy Duty Unwrapped
Self Program ControlsYes
Cycle Times and TemperatureUnwrapped - 132° C (9 minutes)
Wrapped - 132° C (17.5 minutes)
Rubber/Plastic - 121° C (45 minutes)
Heavy Duty Unwrapped - 132° C (12 minutes)
Automatic Shut offYes
Unit Size60 x 41 x 19 cm (23.6 x 16.1 x 7.5 inches)
Cassette Internal Dimensions38 x 18 x 7.5 cm (15 x 7 x 3 inches)
Weight Without Water33 kg (73 pounds)
Power Consumption115 volts 50/60 Hz, 15 amps
1,450 watts
Pre-Programmed CyclesUnwrapped
Wrapped
Rubber/Plastic
Heavy Duty Unwrapped
Self Program ControlsYes
Cycle Times and TemperatureUnwrapped - 132° C (9 minutes)
Wrapped - 132° C (17.5 minutes)
Rubber/Plastic - 121° C (45 minutes)
Heavy Duty Unwrapped - 132° C (12 minutes)
Automatic Shut offYes
Unit Size60 x 41 x 19 cm (23.6 x 16.1 x 7.5 inches)
Cassette Internal Dimensions38 x 18 x 7.5 cm (15 x 7 x 3 inches)
Weight Without Water33 kg (73 pounds)
Power Consumption115 volts 50/60 Hz, 15 amps
1,450 watts
SciScan HYDRIM L110w G4 instrument washer
Under counter steri-center installation, but can also be a freestanding unit
G4 web portal interface includes data storage, service logs and remote access capabilities
Validated cycles to ensure repeatable washing performance
Ten 8” x 11” IMS cassette capacity
USB port for data storage
Robust stainless steel exterior
Includes pump for liquid detergent
Web based documentation software included – no installation required
Active hot air drying
Manufactured in Canada.
The HYDRIM G4 is capable of communicating directly with service personnel or anyone you choose.
Should the HYDRIM G4 ever need attention, diagnostic information can be sent via email to pre-selected dealer service reps, significantly
reducing down time. The HYDRIM G4 supports verifiable processes that are PIN protected with user-defined IDs so that staff members can be required to authorize a cycle.
This encourages extra attention
to process and creates a safer environment for both staff and patient.
With each cycle, information must be stored to protect your office and your patients. The integrated data logger store all cycle information for the lifetime of the unit.
A USB port allows for the manual retrieval of cycle history. The 10/100 Base-T Ethernet connection puts your PC in direct contact with your HYDRIM G4 and the RS232 serial printer port allows you to connect with an external
printer.
G4 web portal interface includes data storage, service logs and remote access capabilities
Validated cycles to ensure repeatable washing performance
Ten 8” x 11” IMS cassette capacity
USB port for data storage
Robust stainless steel exterior
Includes pump for liquid detergent
Web based documentation software included – no installation required
Active hot air drying
Manufactured in Canada.
The HYDRIM G4 is capable of communicating directly with service personnel or anyone you choose.
Should the HYDRIM G4 ever need attention, diagnostic information can be sent via email to pre-selected dealer service reps, significantly
reducing down time. The HYDRIM G4 supports verifiable processes that are PIN protected with user-defined IDs so that staff members can be required to authorize a cycle.
This encourages extra attention
to process and creates a safer environment for both staff and patient.
With each cycle, information must be stored to protect your office and your patients. The integrated data logger store all cycle information for the lifetime of the unit.
A USB port allows for the manual retrieval of cycle history. The 10/100 Base-T Ethernet connection puts your PC in direct contact with your HYDRIM G4 and the RS232 serial printer port allows you to connect with an external
printer.